Overview of the svn authentication system. More...

Data Structures
struct	svn_auth_provider_t
	The main authentication "provider" vtable. More...
struct	svn_auth_provider_object_t
	A provider object, ready to be put into an array and given to svn_auth_open(). More...
struct	svn_auth_cred_simple_t
	`SVN_AUTH_CRED_SIMPLE` credentials. More...
struct	svn_auth_cred_username_t
	`SVN_AUTH_CRED_USERNAME` credentials. More...
struct	svn_auth_cred_ssl_client_cert_t
	`SVN_AUTH_CRED_SSL_CLIENT_CERT` credentials. More...
struct	svn_auth_cred_ssl_client_cert_pw_t
	`SVN_AUTH_CRED_SSL_CLIENT_CERT_PW` credentials. More...
struct	svn_auth_ssl_server_cert_info_t
	SSL server certificate information used by `SVN_AUTH_CRED_SSL_SERVER_TRUST` providers. More...
struct	svn_auth_cred_ssl_server_trust_t
	`SVN_AUTH_CRED_SSL_SERVER_TRUST` credentials. More...
Defines
#define	SVN_AUTH_CRED_SIMPLE "svn.simple"
	Specific types of credentials.
#define	SVN_AUTH_CRED_USERNAME "svn.username"
	Username credential kind.
#define	SVN_AUTH_CRED_SSL_CLIENT_CERT "svn.ssl.client-cert"
	SSL client certificate credential type.
#define	SVN_AUTH_CRED_SSL_CLIENT_CERT_PW "svn.ssl.client-passphrase"
	SSL client certificate passphrase credential type.
#define	SVN_AUTH_CRED_SSL_SERVER_TRUST "svn.ssl.server"
	SSL server verification credential type.
#define	SVN_AUTH_PARAM_PREFIX "svn:auth:"
	Universal run-time parameters, made available to all providers.
#define	SVN_AUTH_PARAM_NON_INTERACTIVE SVN_AUTH_PARAM_PREFIX "non-interactive"
	The application doesn't want any providers to prompt users.
#define	SVN_AUTH_PARAM_DONT_STORE_PASSWORDS
	The application doesn't want any providers to save passwords to disk.
#define	SVN_AUTH_PARAM_STORE_PLAINTEXT_PASSWORDS
	Indicates whether providers may save passwords to disk in plaintext.
#define	SVN_AUTH_PARAM_DONT_STORE_SSL_CLIENT_CERT_PP SVN_AUTH_PARAM_PREFIX "dont-store-ssl-client-cert-pp"
	The application doesn't want any providers to save passphrase to disk.
#define	SVN_AUTH_PARAM_STORE_SSL_CLIENT_CERT_PP_PLAINTEXT SVN_AUTH_PARAM_PREFIX "store-ssl-client-cert-pp-plaintext"
	Indicates whether providers may save passphrase to disk in plaintext.
#define	SVN_AUTH_PARAM_NO_AUTH_CACHE SVN_AUTH_PARAM_PREFIX "no-auth-cache"
	The application doesn't want any providers to save credentials to disk.
#define	SVN_AUTH_PARAM_SSL_SERVER_FAILURES
	The following property is for SSL server cert providers.
#define	SVN_AUTH_PARAM_SSL_SERVER_CERT_INFO
	The following property is for SSL server cert providers.
#define	SVN_AUTH_PARAM_CONFIG_CATEGORY_CONFIG SVN_AUTH_PARAM_PREFIX "config-category-config"
	Some providers need access to the `svn_config_t` configuration.
#define	SVN_AUTH_PARAM_CONFIG_CATEGORY_SERVERS SVN_AUTH_PARAM_PREFIX "config-category-servers"
#define	SVN_AUTH_PARAM_CONFIG SVN_AUTH_PARAM_CONFIG_CATEGORY_SERVERS
#define	SVN_AUTH_PARAM_SERVER_GROUP SVN_AUTH_PARAM_PREFIX "server-group"
	The current server group.
#define	SVN_AUTH_PARAM_CONFIG_DIR SVN_AUTH_PARAM_PREFIX "config-dir"
	A configuration directory that overrides the default ~/.subversion.
Typedefs
typedef struct svn_auth_baton_t	svn_auth_baton_t
	The type of a Subversion authentication object.
typedef struct svn_auth_iterstate_t	svn_auth_iterstate_t
	The type of a Subversion authentication-iteration object.
typedef struct svn_auth_provider_t	svn_auth_provider_t
	The main authentication "provider" vtable.
typedef struct svn_auth_provider_object_t	svn_auth_provider_object_t
	A provider object, ready to be put into an array and given to svn_auth_open().
typedef void(*	svn_auth_simple_provider_func_t )(svn_auth_provider_object_t *provider, apr_pool_t pool)
	The type of function returning authentication provider.
typedef struct svn_auth_cred_simple_t	svn_auth_cred_simple_t
	`SVN_AUTH_CRED_SIMPLE` credentials.
typedef struct svn_auth_cred_username_t	svn_auth_cred_username_t
	`SVN_AUTH_CRED_USERNAME` credentials.
typedef struct svn_auth_cred_ssl_client_cert_t	svn_auth_cred_ssl_client_cert_t
	`SVN_AUTH_CRED_SSL_CLIENT_CERT` credentials.
typedef void(*	svn_auth_ssl_client_cert_pw_provider_func_t )(svn_auth_provider_object_t *provider, apr_pool_t pool)
	A function returning an SSL client certificate passphrase provider.
typedef struct svn_auth_cred_ssl_client_cert_pw_t	svn_auth_cred_ssl_client_cert_pw_t
	`SVN_AUTH_CRED_SSL_CLIENT_CERT_PW` credentials.
typedef struct svn_auth_ssl_server_cert_info_t	svn_auth_ssl_server_cert_info_t
	SSL server certificate information used by `SVN_AUTH_CRED_SSL_SERVER_TRUST` providers.
typedef struct svn_auth_cred_ssl_server_trust_t	svn_auth_cred_ssl_server_trust_t
	`SVN_AUTH_CRED_SSL_SERVER_TRUST` credentials.
typedef svn_error_t (	svn_auth_simple_prompt_func_t )(svn_auth_cred_simple_t *cred, void baton, const char realm, const char username, svn_boolean_t may_save, apr_pool_t *pool)
	Credential-constructing prompt functions.
typedef svn_error_t (	svn_auth_username_prompt_func_t )(svn_auth_cred_username_t *cred, void baton, const char realm, svn_boolean_t may_save, apr_pool_t pool)
	Set cred by prompting the user, allocating cred in pool.
typedef svn_error_t (	svn_auth_ssl_server_trust_prompt_func_t )(svn_auth_cred_ssl_server_trust_t *cred, void baton, const char realm, apr_uint32_t failures, const svn_auth_ssl_server_cert_info_t cert_info, svn_boolean_t may_save, apr_pool_t *pool)
	Set cred by prompting the user, allocating cred in pool.
typedef svn_error_t (	svn_auth_ssl_client_cert_prompt_func_t )(svn_auth_cred_ssl_client_cert_t *cred, void baton, const char realm, svn_boolean_t may_save, apr_pool_t pool)
	Set cred by prompting the user, allocating cred in pool.
typedef svn_error_t (	svn_auth_ssl_client_cert_pw_prompt_func_t )(svn_auth_cred_ssl_client_cert_pw_t *cred, void baton, const char realm, svn_boolean_t may_save, apr_pool_t pool)
	Set cred by prompting the user, allocating cred in pool.
typedef svn_error_t (	svn_auth_plaintext_prompt_func_t )(svn_boolean_t may_save_plaintext, const char realmstring, void baton, apr_pool_t pool)
	A type of callback function for asking whether storing a password to disk in plaintext is allowed.
typedef svn_error_t (	svn_auth_plaintext_passphrase_prompt_func_t )(svn_boolean_t may_save_plaintext, const char realmstring, void baton, apr_pool_t pool)
	A type of callback function for asking whether storing a passphrase to disk in plaintext is allowed.
Functions
svn_auth_ssl_server_cert_info_t *	svn_auth_ssl_server_cert_info_dup (const svn_auth_ssl_server_cert_info_t info, apr_pool_t pool)
	Return a deep copy of info, allocated in pool.
void	svn_auth_open (svn_auth_baton_t *auth_baton, const apr_array_header_t providers, apr_pool_t *pool)
	Initialize an authentication system.
void	svn_auth_set_parameter (svn_auth_baton_t auth_baton, const char name, const void *value)
	Set an authentication run-time parameter.
const void *	svn_auth_get_parameter (svn_auth_baton_t auth_baton, const char name)
	Get an authentication run-time parameter.
svn_error_t *	svn_auth_first_credentials (void credentials, svn_auth_iterstate_t state, const char cred_kind, const char realmstring, svn_auth_baton_t auth_baton, apr_pool_t pool)
	Get an initial set of credentials.
svn_error_t *	svn_auth_next_credentials (void *credentials, svn_auth_iterstate_t state, apr_pool_t *pool)
	Get another set of credentials, assuming previous ones failed to authenticate.
svn_error_t *	svn_auth_save_credentials (svn_auth_iterstate_t state, apr_pool_t pool)
	Save a set of credentials.
SSL server certificate failure bits
Note: These values are stored in the on disk auth cache by the SSL server certificate auth provider, so the meaning of these bits must not be changed.
#define	SVN_AUTH_SSL_NOTYETVALID 0x00000001
	Certificate is not yet valid.
#define	SVN_AUTH_SSL_EXPIRED 0x00000002
	Certificate has expired.
#define	SVN_AUTH_SSL_CNMISMATCH 0x00000004
	Certificate's CN (hostname) does not match the remote hostname.
#define	SVN_AUTH_SSL_UNKNOWNCA 0x00000008
	Certificate authority is unknown (i.e.
#define	SVN_AUTH_SSL_OTHER 0x40000000
	Other failure.
Default credentials defines
Any 'default' credentials that came in through the application itself, (e.g. --username and --password options). Property values are const char *.
#define	SVN_AUTH_PARAM_DEFAULT_USERNAME SVN_AUTH_PARAM_PREFIX "username"
#define	SVN_AUTH_PARAM_DEFAULT_PASSWORD SVN_AUTH_PARAM_PREFIX "password"

Detailed Description

Overview of the svn authentication system.

We define an authentication "provider" as a module that is able to return a specific set of credentials. (e.g. username/password, certificate, etc.) Each provider implements a vtable that

can fetch initial credentials
can retry the fetch (or try to fetch something different)
can store the credentials for future use

For any given type of credentials, there can exist any number of separate providers -- each provider has a different method of fetching. (i.e. from a disk store, by prompting the user, etc.)

The application begins by creating an auth baton object, and "registers" some number of providers with the auth baton, in a specific order. (For example, it may first register a username/password provider that looks in disk store, then register a username/password provider that prompts the user.)

Later on, when any svn library is challenged, it asks the auth baton for the specific credentials. If the initial credentials fail to authenticate, the caller keeps requesting new credentials. Under the hood, libsvn_auth effectively "walks" over each provider (in order of registry), one at a time, until all the providers have exhausted all their retry options.

This system allows an application to flexibly define authentication behaviors (by changing registration order), and very easily write new authentication providers.

An auth_baton also contains an internal hashtable of run-time parameters; any provider or library layer can set these run-time parameters at any time, so that the provider has access to the data. (For example, certain run-time data may not be available until an authentication challenge is made.) Each credential type must document the run-time parameters that are made available to its providers.

Define Documentation

#define SVN_AUTH_CRED_SIMPLE "svn.simple"

Specific types of credentials.

Simple username/password pair credential kind.

The following auth parameters are available to the providers:

SVN_AUTH_PARAM_CONFIG_CATEGORY_CONFIG (svn_config_t*)
SVN_AUTH_PARAM_CONFIG_CATEGORY_SERVERS (svn_config_t*)

The following auth parameters may be available to the providers:

SVN_AUTH_PARAM_NO_AUTH_CACHE (void*)
SVN_AUTH_PARAM_DEFAULT_USERNAME (char*)
SVN_AUTH_PARAM_DEFAULT_PASSWORD (char*)

Definition at line 186 of file svn_auth.h.

#define SVN_AUTH_CRED_SSL_CLIENT_CERT "svn.ssl.client-cert"

SSL client certificate credential type.

The following auth parameters are available to the providers:

SVN_AUTH_PARAM_CONFIG_CATEGORY_SERVERS (svn_config_t*)
SVN_AUTH_PARAM_SERVER_GROUP (char*)

The following optional auth parameters are relevant to the providers:

SVN_AUTH_PARAM_NO_AUTH_CACHE (void*)

Definition at line 236 of file svn_auth.h.

#define SVN_AUTH_CRED_SSL_CLIENT_CERT_PW "svn.ssl.client-passphrase"

SSL client certificate passphrase credential type.

Note:: The realmstring used with this credential type must be a name that makes it possible for the user to identify the certificate.

The following auth parameters are available to the providers:

SVN_AUTH_PARAM_CONFIG_CATEGORY_CONFIG (svn_config_t*)
SVN_AUTH_PARAM_CONFIG_CATEGORY_SERVERS (svn_config_t*)
SVN_AUTH_PARAM_SERVER_GROUP (char*)

The following optional auth parameters are relevant to the providers:

SVN_AUTH_PARAM_NO_AUTH_CACHE (void*)

Definition at line 271 of file svn_auth.h.

#define SVN_AUTH_CRED_SSL_SERVER_TRUST "svn.ssl.server"

SSL server verification credential type.

The following auth parameters are available to the providers:

SVN_AUTH_PARAM_CONFIG_CATEGORY_SERVERS (svn_config_t*)
SVN_AUTH_PARAM_SERVER_GROUP (char*)
SVN_AUTH_PARAM_SSL_SERVER_FAILURES (apr_uint32_t*)
SVN_AUTH_PARAM_SSL_SERVER_CERT_INFO (svn_auth_ssl_server_cert_info_t*)

The following optional auth parameters are relevant to the providers:

SVN_AUTH_PARAM_NO_AUTH_CACHE (void*)

Definition at line 300 of file svn_auth.h.

#define SVN_AUTH_CRED_USERNAME "svn.username"

Username credential kind.

The following optional auth parameters are relevant to the providers:

SVN_AUTH_PARAM_NO_AUTH_CACHE (void*)
SVN_AUTH_PARAM_DEFAULT_USERNAME (char*)

Definition at line 210 of file svn_auth.h.

#define SVN_AUTH_PARAM_CONFIG SVN_AUTH_PARAM_CONFIG_CATEGORY_SERVERS

Deprecated:: Provided for backward compatibility with the 1.5 API.

Definition at line 630 of file svn_auth.h.

#define SVN_AUTH_PARAM_CONFIG_CATEGORY_CONFIG SVN_AUTH_PARAM_PREFIX "config-category-config"

Some providers need access to the svn_config_t configuration.

Definition at line 626 of file svn_auth.h.

#define SVN_AUTH_PARAM_CONFIG_DIR SVN_AUTH_PARAM_PREFIX "config-dir"

A configuration directory that overrides the default ~/.subversion.

Definition at line 637 of file svn_auth.h.

#define SVN_AUTH_PARAM_DONT_STORE_PASSWORDS

Value:

SVN_AUTH_PARAM_PREFIX \
                                                 "dont-store-passwords"

The application doesn't want any providers to save passwords to disk.

Property value is irrelevant; only property's existence matters.

Definition at line 588 of file svn_auth.h.

#define SVN_AUTH_PARAM_DONT_STORE_SSL_CLIENT_CERT_PP SVN_AUTH_PARAM_PREFIX "dont-store-ssl-client-cert-pp"

The application doesn't want any providers to save passphrase to disk.

Property value is irrelevant; only property's existence matters.

Definition at line 600 of file svn_auth.h.

#define SVN_AUTH_PARAM_NO_AUTH_CACHE SVN_AUTH_PARAM_PREFIX "no-auth-cache"

The application doesn't want any providers to save credentials to disk.

Property value is irrelevant; only property's existence matters.

Definition at line 612 of file svn_auth.h.

#define SVN_AUTH_PARAM_NON_INTERACTIVE SVN_AUTH_PARAM_PREFIX "non-interactive"

The application doesn't want any providers to prompt users.

Property value is irrelevant; only property's existence matters.

Definition at line 583 of file svn_auth.h.

#define SVN_AUTH_PARAM_PREFIX "svn:auth:"

Universal run-time parameters, made available to all providers.

If you are writing a new provider, then to be a "good citizen", you should notice these global parameters! Note that these run-time params should be treated as read-only by providers; the application is responsible for placing them into the auth_baton hash. The auth-hash prefix indicating that the parameter is global.

Definition at line 568 of file svn_auth.h.

#define SVN_AUTH_PARAM_SERVER_GROUP SVN_AUTH_PARAM_PREFIX "server-group"

The current server group.

Definition at line 633 of file svn_auth.h.

#define SVN_AUTH_PARAM_SSL_SERVER_CERT_INFO

Value:

SVN_AUTH_PARAM_PREFIX \
  "ssl:cert-info"

The following property is for SSL server cert providers.

This provides the cert info (svn_auth_ssl_server_cert_info_t).

Definition at line 622 of file svn_auth.h.

#define SVN_AUTH_PARAM_SSL_SERVER_FAILURES

Value:

SVN_AUTH_PARAM_PREFIX \
  "ssl:failures"

The following property is for SSL server cert providers.

This provides a pointer to an apr_uint32_t containing the failures detected by the certificate validator.

Definition at line 617 of file svn_auth.h.

#define SVN_AUTH_PARAM_STORE_PLAINTEXT_PASSWORDS

Value:

SVN_AUTH_PARAM_PREFIX \
                                                  "store-plaintext-passwords"

Indicates whether providers may save passwords to disk in plaintext.

Property value can be either SVN_CONFIG_TRUE, SVN_CONFIG_FALSE, or SVN_CONFIG_ASK.

Definition at line 594 of file svn_auth.h.

#define SVN_AUTH_PARAM_STORE_SSL_CLIENT_CERT_PP_PLAINTEXT SVN_AUTH_PARAM_PREFIX "store-ssl-client-cert-pp-plaintext"

Indicates whether providers may save passphrase to disk in plaintext.

Property value can be either SVN_CONFIG_TRUE, SVN_CONFIG_FALSE, or SVN_CONFIG_ASK.

Definition at line 606 of file svn_auth.h.

#define SVN_AUTH_SSL_CNMISMATCH 0x00000004

Certificate's CN (hostname) does not match the remote hostname.

Definition at line 416 of file svn_auth.h.

#define SVN_AUTH_SSL_EXPIRED 0x00000002

Certificate has expired.

Definition at line 414 of file svn_auth.h.

#define SVN_AUTH_SSL_NOTYETVALID 0x00000001

Certificate is not yet valid.

Definition at line 412 of file svn_auth.h.

#define SVN_AUTH_SSL_OTHER 0x40000000

Other failure.

This can happen if neon has introduced a new failure bit that we do not handle yet.

Definition at line 421 of file svn_auth.h.

#define SVN_AUTH_SSL_UNKNOWNCA 0x00000008

Certificate authority is unknown (i.e.

not trusted)

Definition at line 418 of file svn_auth.h.

Typedef Documentation

typedef struct svn_auth_cred_simple_t svn_auth_cred_simple_t

SVN_AUTH_CRED_SIMPLE credentials.

typedef struct svn_auth_cred_ssl_client_cert_pw_t svn_auth_cred_ssl_client_cert_pw_t

SVN_AUTH_CRED_SSL_CLIENT_CERT_PW credentials.

typedef struct svn_auth_cred_ssl_client_cert_t svn_auth_cred_ssl_client_cert_t

SVN_AUTH_CRED_SSL_CLIENT_CERT credentials.

typedef struct svn_auth_cred_ssl_server_trust_t svn_auth_cred_ssl_server_trust_t

SVN_AUTH_CRED_SSL_SERVER_TRUST credentials.

typedef struct svn_auth_cred_username_t svn_auth_cred_username_t

SVN_AUTH_CRED_USERNAME credentials.

typedef svn_error_t*(* svn_auth_plaintext_passphrase_prompt_func_t)(svn_boolean_t *may_save_plaintext, const char *realmstring, void *baton, apr_pool_t *pool)

A type of callback function for asking whether storing a passphrase to disk in plaintext is allowed.

In this callback, the client should ask the user whether storing a passphrase for the realm identified by realmstring to disk in plaintext is allowed.

The answer is returned in *may_save_plaintext. baton is an implementation-specific closure. All allocations should be done in pool.

Since:: New in 1.6

Definition at line 516 of file svn_auth.h.

typedef svn_error_t*(* svn_auth_plaintext_prompt_func_t)(svn_boolean_t *may_save_plaintext, const char *realmstring, void *baton, apr_pool_t *pool)

A type of callback function for asking whether storing a password to disk in plaintext is allowed.

In this callback, the client should ask the user whether storing a password for the realm identified by realmstring to disk in plaintext is allowed.

The answer is returned in *may_save_plaintext. baton is an implementation-specific closure. All allocations should be done in pool.

Since:: New in 1.6

Definition at line 497 of file svn_auth.h.

typedef struct svn_auth_provider_object_t svn_auth_provider_object_t

A provider object, ready to be put into an array and given to svn_auth_open().

typedef struct svn_auth_provider_t svn_auth_provider_t

The main authentication "provider" vtable.

typedef svn_error_t*(* svn_auth_simple_prompt_func_t)(svn_auth_cred_simple_t **cred, void *baton, const char *realm, const char *username, svn_boolean_t may_save, apr_pool_t *pool)

Credential-constructing prompt functions.

These exist so that different client applications can use different prompt mechanisms to supply the same credentials. For example, if authentication requires a username and password, a command-line client's prompting function might prompt first for the username and then for the password, whereas a GUI client's would present a single dialog box asking for both, and a telepathic client's would read all the information directly from the user's mind. All these prompting functions return the same type of credential, but the information used to construct the credential is gathered in an interface-specific way in each case. Set *cred by prompting the user, allocating *cred in pool. baton is an implementation-specific closure.

If realm is non-NULL, maybe use it in the prompt string.

If username is non-NULL, then the user might be prompted only for a password, but *cred would still be filled with both username and password. For example, a typical usage would be to pass username on the first call, but then leave it NULL for subsequent calls, on the theory that if credentials failed, it's as likely to be due to incorrect username as incorrect password.

If may_save is FALSE, the auth system does not allow the credentials to be saved (to disk). A prompt function shall not ask the user if the credentials shall be saved if may_save is FALSE. For example, a GUI client with a remember password checkbox would grey out the checkbox if may_save is FALSE.

Definition at line 376 of file svn_auth.h.

typedef void(* svn_auth_simple_provider_func_t)(svn_auth_provider_object_t **provider, apr_pool_t *pool)

The type of function returning authentication provider.

Definition at line 166 of file svn_auth.h.

typedef svn_error_t*(* svn_auth_ssl_client_cert_prompt_func_t)(svn_auth_cred_ssl_client_cert_t **cred, void *baton, const char *realm, svn_boolean_t may_save, apr_pool_t *pool)

Set *cred by prompting the user, allocating *cred in pool.

baton is an implementation-specific closure. realm is a string that can be used in the prompt string.

If may_save is FALSE, the auth system does not allow the credentials to be saved (to disk). A prompt function shall not ask the user if the credentials shall be saved if may_save is FALSE. For example, a GUI client with a remember certificate checkbox would grey out the checkbox if may_save is FALSE.

Definition at line 459 of file svn_auth.h.

typedef svn_error_t*(* svn_auth_ssl_client_cert_pw_prompt_func_t)(svn_auth_cred_ssl_client_cert_pw_t **cred, void *baton, const char *realm, svn_boolean_t may_save, apr_pool_t *pool)

Set *cred by prompting the user, allocating *cred in pool.

baton is an implementation-specific closure. realm is a string identifying the certificate, and can be used in the prompt string.

If may_save is FALSE, the auth system does not allow the credentials to be saved (to disk). A prompt function shall not ask the user if the credentials shall be saved if may_save is FALSE. For example, a GUI client with a remember password checkbox would grey out the checkbox if may_save is FALSE.

Definition at line 477 of file svn_auth.h.

typedef void(* svn_auth_ssl_client_cert_pw_provider_func_t)(svn_auth_provider_object_t **provider, apr_pool_t *pool)

A function returning an SSL client certificate passphrase provider.

Definition at line 252 of file svn_auth.h.

typedef svn_error_t*(* svn_auth_ssl_server_trust_prompt_func_t)(svn_auth_cred_ssl_server_trust_t **cred, void *baton, const char *realm, apr_uint32_t failures, const svn_auth_ssl_server_cert_info_t *cert_info, svn_boolean_t may_save, apr_pool_t *pool)

Set *cred by prompting the user, allocating *cred in pool.

baton is an implementation-specific closure.

cert_info is a structure describing the server cert that was presented to the client, and failures is a bitmask that describes exactly why the cert could not be automatically validated, composed from the constants SVN_AUTH_SSL_* (SVN_AUTH_SSL_NOTYETVALID etc.). realm is a string that can be used in the prompt string.

If may_save is FALSE, the auth system does not allow the credentials to be saved (to disk). A prompt function shall not ask the user if the credentials shall be saved if may_save is FALSE. For example, a GUI client with a trust permanently checkbox would grey out the checkbox if may_save is FALSE.

Definition at line 439 of file svn_auth.h.

typedef svn_error_t*(* svn_auth_username_prompt_func_t)(svn_auth_cred_username_t **cred, void *baton, const char *realm, svn_boolean_t may_save, apr_pool_t *pool)

Set *cred by prompting the user, allocating *cred in pool.

baton is an implementation-specific closure.

If realm is non-NULL, maybe use it in the prompt string.

If may_save is FALSE, the auth system does not allow the credentials to be saved (to disk). A prompt function shall not ask the user if the credentials shall be saved if may_save is FALSE. For example, a GUI client with a remember username checkbox would grey out the checkbox if may_save is FALSE.

Definition at line 396 of file svn_auth.h.

Function Documentation

svn_error_t* svn_auth_first_credentials	(	void **	credentials,
		svn_auth_iterstate_t **	state,
		const char *	cred_kind,
		const char *	realmstring,
		svn_auth_baton_t *	auth_baton,
		apr_pool_t *	pool
	)

Get an initial set of credentials.

Ask auth_baton to set *credentials to a set of credentials defined by cred_kind and valid within realmstring, or NULL if no credentials are available. Otherwise, return an iteration state in *state, so that the caller can call svn_auth_next_credentials(), in case the first set of credentials fails to authenticate.

Use pool to allocate *state, and for temporary allocation. Note that *credentials will be allocated in auth_baton's pool.

const void* svn_auth_get_parameter	(	svn_auth_baton_t *	auth_baton,
		const char *	name
	)

Get an authentication run-time parameter.

Return a value for run-time parameter name from auth_baton. Return NULL if the parameter doesn't exist.

svn_error_t* svn_auth_next_credentials	(	void **	credentials,
		svn_auth_iterstate_t *	state,
		apr_pool_t *	pool
	)

Get another set of credentials, assuming previous ones failed to authenticate.

Use state to fetch a different set of *credentials, as a follow-up to svn_auth_first_credentials() or svn_auth_next_credentials(). If no more credentials are available, set *credentials to NULL.

Note that *credentials will be allocated in auth_baton's pool.

void svn_auth_open	(	svn_auth_baton_t **	auth_baton,
		const apr_array_header_t *	providers,
		apr_pool_t *	pool
	)

Initialize an authentication system.

Return an authentication object in *auth_baton (allocated in pool) that represents a particular instance of the svn authentication system. providers is an array of svn_auth_provider_object_t pointers, already allocated in pool and intentionally ordered. These pointers will be stored within *auth_baton, grouped by credential type, and searched in this exact order.

svn_error_t* svn_auth_save_credentials	(	svn_auth_iterstate_t *	state,
		apr_pool_t *	pool
	)

Save a set of credentials.

Ask state to store the most recently returned credentials, presumably because they successfully authenticated. All allocations should be done in pool.

If no credentials were ever returned, do nothing.

void svn_auth_set_parameter	(	svn_auth_baton_t *	auth_baton,
		const char *	name,
		const void *	value
	)

Set an authentication run-time parameter.

Store name / value pair as a run-time parameter in auth_baton, making the data accessible to all providers. name and value will NOT be duplicated into the auth_baton's pool. To delete a run-time parameter, pass NULL for value.

svn_auth_ssl_server_cert_info_t* svn_auth_ssl_server_cert_info_dup	(	const svn_auth_ssl_server_cert_info_t *	info,
		apr_pool_t *	pool
	)

Return a deep copy of info, allocated in pool.

Since:: New in 1.3.

Data Structures

Defines

Typedefs

Functions

SSL server certificate failure bits

Default credentials defines

Detailed Description

Define Documentation

Typedef Documentation

Function Documentation